Seal Type 51U & 52U

Multi Spring Mechanical Seal


Seal Type 51U is recommended for clean media application. Seal Type 52U is Standard for using where Corrosive Liquid are being Processed. PTFE Wedge Construction of the Secondary Sealing Member provides Universal service application. Construction of these Seal designs holds whole Rotary Parts together with the help of Snap Rings which is make easiest of Installation and Removal. These Type of Seal designed and used for Petroleum Products, Low Aggressive Chemicals and Refrigerants in Centrifugal pumps and other Equipment with Rotating Shafts. Multi Spring Mechanical Seal are carefully designed at Superproof Seals Engineering.



Agitator / Reactor Seal
PUMP SEAL
Seal Support System

Thermosyphon System

Bearing Isolator

Bearing Isolator

Multi Spring Mechanical Seal manufacturer mumbai

Unbalance Pusher Seals available in Single and Dual. Configuration used for Sealing Environmentally. Dual Directional. Mechanical Seal Drive - Reduces Slippage on Shaft or Sleeve to Eliminate Galling and Premature Wear . Components in Cartridge design are builds for the Highest Reliability and simple Installation. Flushing Ports helps to reduces the Heat for Uniform Face Cooling. Seal Type 51U is 'O' Ring Seal design which helps to Eliminate Scoring on Shaft and Sleeve area. Use of 'O' Ring Design is depends on suitable applications. Seal Type 52U is Wedge design which helps to Creates Positive Seal use in Extreme Temperature, Chemical application. Using of suitable Coating on sealing area to Eliminate Scoring on Shaft and Sleeve



Features

Seal Ring Faces : Cabon, GFT, SiC and TC
Seat Faces : Ceramic, SiC and TC
Elastomer : Viton, PTFE, GFT, EPDM, NBR, Buna-N and FFKM
MOC : SS 316, Hast -C and Alloy - 20

Materials

Shaft Dia. : 10mm to 100mm
Pressure : Up to 10 bar
Temperature : -20oC to 260oC (Depending upon Elastomer)
Speed                 : 3000 r.p.m.

Operating Capabilities

 

 

SEAL SIZE

D1

D3

D6

D7

D9

L3

L6

L7

L9

inch

mm

0.875

22.22

36.50

32.00

38.10

28.50

25.40

4.50

5.50

6.80

1.000

25.40

38.80

35.20

41.28

31.50

28.00

4.50

5.50

6.80

1.125

28.58

43.50

38.30

44.45

34.50

29.00

4.50

5.50

6.80

1.250

31.75

46.80

41.60

47.62

37.90

30.00

4.50

5.50

6.80

1.375

34.92

50.00

44.70

50.80

41.10

30.00

4.50

5.50

6.80

1.500

38.10

53.50

47.90

53.98

44.30

30.00

4.50

5.50

6.80

1.625

41.28

57.00

54.30

60.30

50.50

30.00

5.00

5.50

8.15

1.750

44.45

60.00

57.50

63.50

57.00

30.00

5.00

5.50

8.15

1.875

47.62

63.50

60.60

66.68

61.00

30.00

5.00

5.50

8.15

2.000

50.80

66.70

63.80

69.85

61.00

30.00

5.00

5.50

8.10

2.125

53.98

69.50

70.10

76.20

66.40

30.00

5.50

6.50

9.00

2.250

57.15

72.50

73.30

79.38

69.30

30.00

5.50

6.50

9.00

2.375

60.32

76.50

76.50

82.55

72.50

30.00

5.50

6.50

9.00

2.500

63.50

79.50

79.65

85.72

76.00

34.50

5.50

6.50

9.00

2.625

66.68

82.50

79.65

85.72

76.00

34.50

6.00

7.50

9.80

2.750

69.85

85.70

82.80

88.90

79.00

34.50

6.00

7.50

9.80

2.875

73.02

93.50

85.70

95.25

81.40

39.00

7.50

5.50

11.90

3.000

76.20

96.70

88.90

98.42

85.30

39.00

7.50

5.50

11.90

3.125

79.38

101.50

92.10

101.60

88.40

42.00

7.50

5.50

11.90

3.250

82.55

104.70

95.30

104.78

91.50

42.00

7.50

5.50

11.90

3.375

85.72

108.00

98.40

107.95

94.00

42.00

7.50

5.50

11.90

3.500

88.90

111.00

101.60

111.12

97.50

42.00

7.50

5.50

11.90

3.625

92.08

114.00

104.75

114.30

100.50

42.00

8.50

5.80

13.00

3.750

95.25

118.50

108.00

117.48

104.00

44.50

8.50

5.80

13.00

3.875

98.42

120.50

111.10

120.65

107.00

44.50

8.50

5.80

13.00

4.000

101.60

124.70

114.30

123.82

110.00

44.50

8.50

5.80

13.00

 

 

 

 

Due to continuous improvement specifications and dimensions may change without prior notice.


Design also available as per
DIN EN 12756 standard
PUMP SEAL  >>  Pusher Seal | Non-Pusher Seal | Cartridge Seal
sales@superproofseals.com
+91-22-2676 4504
HOME
SUPERPROOF SEALS ENGINEERING PVT. LTD.
© 2015 | PRIVACY POLICY
PRODUCTS